nuKMASSFIREPROOFING02

People-Proof Fireproofing

Thermal Designs own proprietary formulation of epoxy intumescent coating.

The preferred method of protection is “molded-on” K-MASS™ Coating applied using TDI own injection molding process.

This is NOT hand applied or sprayed on Fireproofing!

The process precisely controls the thickness and shape of the coating bonded to the outer surface of each component part.


bigmorinpneu

The result is a permanently bonded layer of Fireproofing that is durable, weather and chemical resistant and there forever. The K-MASS™ process allows COMPLETE access to equipment to operate & maintain without interference or concern for the fireproofing.


P1gh07

User Friendly Fireproofing?

All Areas of an actuator protected with K-MASS™ are available to personnel with standard tools. Routine maintenance or major repair are not affected by the presence of the K-MASS™ coating.


P1010010


K-MASS™ coating allows for direct view of important dials & display lens. Control Knobs & Buttons can be extended through the layer of K-MASS™ Fireproof Coating.

redjunct1

Thermal Designs, Inc. - USA
Corporate Headquarters
5352 Prudence Street
Houston, Texas 77045
Main: 713.433.8110
Fax: 713.433.5227

FireProof Enclosures™ TechData

Fireproof Enclosure Linear Valve Actuator Protection

Technical Data:

sinteflogo  
  nfpa_logo2  
    API  
   
  bureauveritaslogo factorymutualsystemlogo
  swrilogo tuvoctagon
  pyrotenax  
    3m  
   
 
  ul-logo  
 
 

Contact Us Globally

 

Copyright © 2017. All Rights Reserved.